LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2005 >> Liberty Renegade, 4WD, Part Time, Standard >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System >> Front >> Stabilizer Bar >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Stabilizer Bar: Installation

  1. Install the stabilizer bar to the vehicle.
  2. Install the stabilizer bar bushing clamps. See Figure. Tighten the nuts to 149 N.m (110 ft.lbs.).
  3. Install the upper stabilizer link bolts and washer at the stabilizer bar. Tighten the bolt to 136 N.m (100 ft.lbs.).
  4. Install the tire and wheel assembly. (Refer to TIRES/WHEELS/WHEELS - STANDARD PROCEDURE) .
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals