LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2003 >> Wrangler Sport, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules >> Controller Antilock Brake >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Controller Antilock Brake: Installation

  1. Install CAB to the HCU (Figure).
  2. Install mounting bolts. Tighten to 2 N.m (16 in. lbs.).
  3. Install the pump electrical connector to the CAB (Figure).
  4. Install the wiring harness connector to the CAB and push down on the release to secure the connector.
  5. Install negative battery cable to the battery.
scientia non olet · About LEMON Manuals