LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2003 >> Wrangler SE, Automatic >> Repair and Diagnosis (Single Page) >> Electrical >> Body Electrical >> Power Distribution >> Power Distribution Center Support Bracket >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Power Distribution Center Support Bracket: Removal

  1. Disconnect and isolate the battery negative cable.
  2. Remove the Power Distribution Center (PDC) from the PDC bracket (Refer to REMOVAL ).
  3. Remove the three screws that secure the PDC bracket to the right front inner fender (Figure).
  4. Remove the PDC bracket from the right front inner fender.
scientia non olet · About LEMON Manuals