Flow Management Valve: Installation
WARNING: This page is about a different car, the 2004 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
- Raise vehicle.
- Attach 2 large hoses and 1 small line to flow management valve. Position this assembly to top of fuel tank.
- Connect valve hose at EVAP canister.
- Lower vehicle.
- Attach valve hose and clamp to top of fuel pump module.
- Apply silicone sealant to bottom of fuel pump module metal access plate.
- Install fuel pump module metal access plate and 4 nuts. Tighten nuts to 3 N.m (26 in. lbs.) torque.
- Position carpet and install 2 new cargo clamp rivets.