LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2002 >> Grand Cherokee Overland >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules >> Diagnostic Tests >> Communication >> MIC Message Not Received At BCM
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

MIC Message Not Received At BCM

When Monitored: With the ignition in run, and the IOD fuse installed.

Set Condition: The BCM does not receive any messages from the Instrument Cluster (MIC) for at least 30 seconds.

Possible Causes are:

  1. Turn ignition on. Using the DRBIII(R), enter BODY, then ELECTRO/MECH CLUSTER. Was the DRBIII(R) able to I/D or communicate with the Instrument Cluster (MIC)? If yes, go to next step. If no, perform the appropriate test under COMMUNICATION  in SYMPTOM TESTS. Perform BODY VERIFICATION TEST VER 1  under VERIFICATION TESTS.
  2. Using the DRBIII(R), erase DTC's. Turn the ignition on and wait approximately 1 minute. Using the DRBIII(R), read DTC's. Did this DTC reset? If yes, replace the Body Control Module. Perform BODY VERIFICATION TEST VER 1  under VERIFICATION TESTS. If no, test is complete.
scientia non olet · About LEMON Manuals