LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2002 >> Grand Cherokee Overland >> Repair and Diagnosis (Single Page) >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules >> Removal & Installation >> Controller Anti-Lock Brake >> Removal & Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal & Installation

  1. Remove negative battery cable from the battery. Remove air cleaner housing. Release CAB harness connector and remove connector.
  2. Remove pump motor connector. Remove CAB mounting bolts and remove the CAB from the HCU.
  3. Install the CAB onto the HCU and tighten mounting bolts. Install pump motor connector. Install CAB harness connector and push down connector release.
  4. Install air cleaner housing. Install negative battery cable to the battery.
Fig 1: Locating Controller Anti-Lock Brake
G00011641Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals