LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2002 >> Grand Cherokee Laredo, 4.7 N, RWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System Components >> HCU (Hydraulic Control Unit) >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

HCU (Hydraulic Control Unit): Removal

  1. Remove the negative battery cable from the battery.
  2. Remove the air cleaner housing. Refer to 4.0L 6-CYLINDER or 4.7L V8 .
  3. Pull the CAB harness connector release up and remove connector (Fig 1 ).
    Fig 1: Pulling CAB Connector Release
    G02743963Courtesy of DAIMLERCHRYSLER CORP.
  4. Remove the brake lines from the HCU.
  5. Remove the HCU/CAB side mounting bolt and the two rear mounting bolts. (Fig 2 ).
  6. Remove the HCU/CAB assembly from the vehicle.
    Fig 2: Removing HCU/CAB Assembly
    G02743964Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals