LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2000 >> Cherokee Classic, 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Starting System >> On-Vehicle Testing >> Park/Neutral Position Switch
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Park/Neutral Position Switch

NOTE: For 4.7L automatic transmission testing, see TRANSMISSION RANGE (TR) SENSOR  .
  1. Place gear selector lever in Park. Disconnect negative battery cable. Raise and support vehicle. Disconnect Park/Neutral switch 3-pin connector. Using an ohmmeter, check for continuity between switch center terminal and good ground. If continuity exists, go to next step. If continuity does not exist, replace faulty switch.
  2. Place gear selector lever in Reverse. Check for continuity between switch center terminal and good ground. If continuity does not exist, switch is okay. If continuity exists, replace faulty switch.
scientia non olet · About LEMON Manuals