LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 1998 >> Cherokee SE, 4D Utility, 2.5 P, 4WD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - Engine Performance >> Self-Diagnostic Tests >> Test VER-3A: Charging Verification >> Notes
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Test VER-3A: Charging Verification: Notes

NOTE: If Powertrain Control Module (PCM) was replaced, the correct vehicle mileage and Vehicle Identification Number (VIN) must be programmed into the PCM to prevent Diagnostic Trouble Codes (DTCs) from being set in the Anti-Lock Brake System (ABS) module and Supplemental Restraint System (SRS) module. To program PCM and clear DTCs from ABS and SRS modules, proceed to appropriate procedure listed below. On models equipped with a Smart Key Immobilizer Module (SKIM), if replacing Powertrain Control Module (PCM), the secret key data must also be updated to enable engine starting. To update secret key data, proceed to appropriate procedure listed below.