Speed (Cruise) Control Switch Test
Disconnect negative battery cable. Wait 2 minutes for air bag system capacitor to discharge. Remove both speed control switch assemblies from steering wheel and disconnect connectors. See the SPEED (CRUISE) CONTROL SWITCH under REMOVAL & INSTALLATION. Using an ohmmeter, check resistance at speed control switch terminals No. 1 and 2 (on both switches). See the SPEED CONTROL SWITCH RESISTANCE . See Fig 1 . If continuity is not as specified, replace defective speed control switch.
SPEED CONTROL SWITCH RESISTANCE
| Switch Position | Ohms |
|---|---|
| None Depressed | Infinity |
| ON | 900-918 |
| RESUME/ACCEL | 15,246-15,554 |
| SET/DECEL | 6584-6716 |