Brake Switch
Disconnect brake switch 6-pin connector. Using an ohmmeter, check for continuity at brake switch terminals with switch in indicated position. Refer to the BRAKE SWITCH CONTINUITY . Also, see Fig 1 . If continuity is not as specified, check brake switch adjustment. If brake switch adjustment is okay, replace defective brake switch.
BRAKE SWITCH CONTINUITY
| Switch Plunger Position | Check Between Pin Nos. | Continuity? |
|---|---|---|
| Released | 5 & 6 | Yes |
| Depressed | 1 & 2 | Yes |
| 3 & 4 | Yes | |