LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 1996 >> Cherokee Sport, 2D Utility, 4WD, Part Time, Standard >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment Specifications & Procedures >> Adjustments >> Toe-In Adjustment
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Toe-In Adjustment

  1. Center front wheels straight ahead. Measure toe and compare to specifications. See ALIGNMENT SPECIFICATIONS  .
  2. Center steering wheel by counting the turns required to hit left and right steering stops. Center steering wheel midway between stops. Loosen drag link adjustment sleeve clamp bolts. See Fig 1 .
  3. Rotate adjustment sleeve to adjust right wheel toe to specification. See ALIGNMENT SPECIFICATIONS  . Position clamp bolts so threaded bolt ends face slightly upward and to rear of vehicle. Tighten drag link drag link adjustment sleeve clamp bolts to specification. See TORQUE SPECIFICATIONS  .
  4. Loosen tie rod adjustment sleeve clamp bolts at each end of tie rod. See Fig 1 . Rotate tie rod adjustment sleeve to adjust left wheel to toe specification. See ALIGNMENT SPECIFICATIONS  . When adjustment is complete, position sleeve as described earlier and tighten bolts to specifications. See TORQUE SPECIFICATIONS  .
Fig 1: Locating Drag Link & Tie Rod Adjustment Sleeve Clamps
G96C25488Courtesy of CHRYSLER CORP.
scientia non olet · About LEMON Manuals