BRAKELIGHT Switch
Disconnect brakelight switch 6-pin connector. Using an ohmmeter, check for continuity at switch side of connector terminals. See TESTING BRAKELIGHT SWITCH . If continuity is not as specified, check brakelight switch adjustment. If switch adjustment is okay, replace defective brakelight switch.
TESTING BRAKELIGHT SWITCH
| Brake Pedal Position | Check Between Terminals No. | Continuity Present? |
|---|---|---|
| Released | 1 & 4 | Yes |
| 3 & 6 | Yes | |
| 2 & 5 | No | |
| Depressed | 1 & 4 | No |
| 3 & 6 | No | |
| 2 & 5 | Yes | |