LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 1990 >> Comanche Eliminator, 4WD, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Distributor R & I >> Reassembly
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Distributor R & I: Reassembly

  1. Install stator assembly and retaining screw. Position stator assembly harness through distributor housing and push grommet into position. See Figure . Install distributor shaft into distributor housing. Ensure seals are in place and not damaged (if equipped).
  2. Install distributor gear washer and distributor gear onto shaft. See Figure . Install distributor gear retaining roll pin. Install distributor rotor. Install distributor to engine.
scientia non olet · About LEMON Manuals