LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 1989 >> Wagoneer >> Repair and Diagnosis >> Engine Performance >> System >> 4.0L MPFI CEC Testing >> System Testing >> Knock Sensor Test
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Knock Sensor Test

  1. Connect M.S. 1700 Diagnostic Tester to vehicle. Proceed to state display mode. Start engine and observe knock unit value. Using the tip of a screwdriver, gently tap cylinder block near knock sensor and observe knock value.
  2. Knock value should increase while tapping on cylinder block. If knock value does not increase while tapping on cylinder block, then check knock sensor for proper connection. If connection is good, replace knock sensor.
scientia non olet · About LEMON Manuals