LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 1987 >> Cherokee Limited >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Adjustment >> Shift Linkage >> Cable Linkage
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Cable Linkage

  1. Place gearshift lever in "P" position and raise vehicle. Using a small screwdriver, unlock shift control cable by releasing U-shaped cable adjuster clamp. Remove cable from mounting bracket.
  2. Move transmission shift lever rearward until fully seated into Park detent. Ensure that driveshaft cannot be rotated. Snap control cable into cable mounting bracket and replace U-shaped cable adjuster clamp.
  3. Lower vehicle and verify engine starting. Engine should start only with shifter in "P" or "N" position.
scientia non olet · About LEMON Manuals