September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Master Switch Circuit
- Remove escutcheon and housing from master switch. Separate
terminal plate by releasing retainer hooks to expose terminal ends.
Turn ignition on.
- Using a 12-volt test light, connect one lead to Black wire and
other lead to Red terminal. Repeat test at second Black wire. If test
light does not glow in either test, remove lead to Black terminal and
connect to chassis ground.
- If test light glows, an open exists between master switch and
ground. If test light does not glow, it indicates a defective circuit
breaker or an opening in the Red wire from circuit breaker to master
switch.