LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jaguar >> 2006 >> XJ8 Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Electronic Engine Controls - 4.2L (2003.5-09) >> Removal and Installation >> Engine Control Module (ECM) (18.30.01) >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Engine Control Module (ECM) (18.30.01): Installation

    CAUTION: Make sure that the electrical connector is located correctly in the ECM. Do not force or overtighten the electrical connector. Failure to follow this instruction may result in damage to the component.
    CAUTION: Make sure the ECM support bracket is located correctly.
  1. To install, reverse the removal procedure.
    • Tighten to 5 N.m.
      Fig 1: Tightening Bolts With Torque Specification
      G03555127Courtesy of JAGUAR CARS, INC.
scientia non olet · About LEMON Manuals