Refrigerant Pressure Sensor / Switch: Service and Repair

Pressure Cutoff Switch - 2.5L/3.0L/4.2L (82.10.32)

Installation

All vehicles
1. Install a new pressure cutoff switch O-ring seal.
- Lubricate the new 0-ring seal with A/C refrigerant oil.

2. Install the pressure cutoff switch.
- Tighten to 8 Nm.







3. Connect the pressure cutoff switch electrical connector.







4. Clean off any oil residue that may contain A/C system flourescent dye.

Vehicles with 2.5L or 3.0L engine
1. Install the air cleaner.

Vehicles with 4.2L engine
1. Install the air cleaner.

All vehicles
1. Carry out the A/C system flourescent dye leak detection procedure.