Power Steering Pump: Disassembly
- Remove rear mounting plate and pulley from pump. Remove front mounting plate from pump. Clean pump body. Remove pressure outlet union and mounting plate studs from rear of pump. See Fig 1 .
- Tip pump to remove flow control valve and spring. Place pump in padded vise. Tap pump casing from body. Remove "O" rings from pump body and magnet from flange.
- Using a pin punch, push retaining ring free from groove and lever from body. Remove spring retaining plate and spring. Remove "O" ring from recess in pump body.
- Remove Woodruff key from shaft. Tap roller spindle toward body. Remove pump assembly from body. Remove "O" ring from recess in pump body. Remove dowel pins.