Engine Control Module

35 Position ECU Plug:

CONNECTOR VIEW

SYSTEM
P-Type

LOCATION
In trunk.

TERMINAL ID
1 - Ground
2 - Ground (Not installed on 1990 - 91 systems)
3 - Full Load Throttle
4 - Integrator "A"
5 - Coolant Temperature Sensor
6 - 02 sensor (Bank "A")
7 - Throttle Position sensor input signal
8 - Injector Driver Turn-on (Bank "B")
9 - Injector Driver Turn-on (Bank "B")
10 - Integrator "B"
11 - Injector Driver Hold (Bank "B")
12 - Injector Driver Hold (Bank "A")
13 - Injector Driver Turn-on (Bank "A")
14 - Injector Driver Turn-on (Bank "A")
15 - Fuel Pump Relay Control
16 - Injector Driver Ground
17 - Injector Driver Ground
18 - Ignition Coil (-)
19 - Sensor Ground
20 - Sensor Reterence Voltage
21 - Air Temperature Sensor
22 - ECU Power +Ve
23 - Shield Ground
24 - 02 Sensor Signal (Bank "B")
25 - 02 Sensor Disable
26 - Starter Signal
27 - Injector Driver Turn-on (Bank "B")
28 - Injector Driver Turn-on (Bank "B")
29 - Injector Driver Hold (Bank "B")
30 - Injector Driver Hold (Bank "A")
31 - Injector Driver Turn-on (Bank "A")
32 - Injector Driver Turn-on (Bank "A")
33 - N/A
34 - Injector Driver Ground
35 - Injector Driver Ground