Removal Procedure

IMPORTANT: Do NOT swap digital radio receivers between vehicles. Swapping digital receivers between vehicles will activate the digital radio Theftlock® and "XM Theftlock®" will display.

Lower the right closeout insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side .

Fig 1: Identifying Module Mounting

Courtesy of GENERAL MOTORS CORP.

Remove the electrical connector (1) from the receiver.

Fig 2: View Of Connector

Courtesy of GENERAL MOTORS CORP.

Remove the antenna electrical connector (1) from the receiver.

Fig 3: View Of Insulator Panel & Retaining Nuts

Courtesy of GENERAL MOTORS CORP.

Remove the nuts retaining the receiver to the insulator panel.
Remove the receiver from the vehicle.