LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 2006 >> Ascender Limited, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Engine Exhaust System) >> Repair Instructions >> Exhaust System Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

WARNING: This page is about a different car, the 2007 Isuzu Ascender, 2007 GMC Envoy, 2007 Chevrolet TrailBlazer, and 2007 Buick Rainier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the frame brace. Refer to Frame Brace Replacement (TrailBlazer EXT, Envoy XL) or Frame Brace Replacement (TrailBlazer, Envoy, Bravada) in Frame and Underbody.
  3. Remove the spare tire assembly.
  4. Remove the rear axle tie rod. Refer to Rear Axle Tie Rod Replacement in Rear Suspension.
  5. Remove the rear axle brace. Refer to Rear Axle Brace Replacement in Rear Suspension.
    6. Fig 1: View Of Exhaust Pipe To Muffler Joint
    GM753687Courtesy of GENERAL MOTORS CORP.
  6. Remove the nuts that secure the muffler to the catalytic converter.
    7. Fig 2: Locating Exhaust Hangers
    GM753688Courtesy of GENERAL MOTORS CORP.
  7. Separate the exhaust system from the exhaust hanger insulators.
  8. Remove the exhaust system.
scientia non olet · About LEMON Manuals