LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 2004 >> Rodeo 2WD V6-3.5L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Testing and Inspection >> Scan Tool Testing and Procedures >> Miscellaneous Tests >> Lamps Test
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Lamps Test

Lamps Test
This test is conducted check MIL and Low Fuel Lamp for its working.

Tech 2 must be used for this test.

Test Procedure:
1. Connect Tech 2 to the vehicle DLC.
2. Run the Engine at idle.




3. Select F3: Miscellaneous Test in the Application Menu.




4. Select F0: Lamps Test in the Miscellaneous Test.
5. Select F0: Malfunction Indicator Lamp.
6. Push "On" soft key.
7. Make sure Lamp illuminates.
8. If Lamp illuminates, the Lamp is operating correctly.
9. Select F1: Cruise Set Lamp.
10. Push "On" soft key.
11. Make sure Lamp illuminates.
12. If Lamp illuminates, the Lamp is operating correctly.
scientia non olet · About LEMON Manuals