October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Camshaft Position Sensor: Service and Repair

REMOVAL
1. Disconnect battery ground cable
2. Wiring connector from camshaft position sensor.

3. Remove camshaft position sensor from cylinder head.

INSTALLATION
1. Install camshaft position sensor into the cylinder head.
Before installation,apply small amount of engine oil to the O-ring.

Torque: 8 Nm (5.9 lb ft)

2. Reconnect wiring connector to camshaft position sensor.