LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 2004 >> Axiom Base, RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Diagnostic Information & Procedures >> On Vehicle Service >> Crankshaft Position (CKP) Sensor >> Inspection Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Inspection Procedure

  1. Inspect the sensor O-ring for cracks or leaks.
  2. Replace the O-ring if it is worn or damaged.
  3. Lubricate the new O-ring with engine oil.
  4. Install the lubricated O-ring.
scientia non olet · About LEMON Manuals