LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 2004 >> Axiom Base, 4WD >> Repair and Diagnosis (Single Page) >> Engine Performance >> Tune-Up >> Ignition System >> Knock Sensor >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Knock Sensor: Removal

  1. Disconnect battery ground cable
  2. Remove common chamber.
  3. Wiring connector from knock sensor.
  4. Remove knock sensor from cylinder block.
    Fig 1: Removing Knock Sensor From Cylinder Block
    G02787955Courtesy of ISUZU MOTOR CO.
scientia non olet · About LEMON Manuals