October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Conditions For Setting DTC

Following conditions must be met for DTC diagnostic test to run:

No TP sensor DTCs are set.
Engine is running.
Throttle angle is above zero percent, if engine speed is 1300 RPM or less.
Throttle angle is above 5 percent, if engine speed is 1300 RPM or more.
MAP sensor indicates a manifold absolute pressure is less than 11 kPa.
Above conditions are met for 128 test samples within 256 test samples (7.81 msec/test).