LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 2002 >> Axiom Base, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Removal & Installation >> Brake Switch >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Brake Switch: Installation

  1. Adjust stop light switch to specified clearance between switch housing and brake pedal by rotating switch housing. See Fig 1
    NOTE: Do not attempt to force the push rod into position during the stoplight switch installation and adjustment procedure.
    Fig 1: Adjusting Stop Light Switch Between Housing & Brake Pedal
    G00211959Courtesy of ISUZU MOTOR CO.
  2. Connect connector (1).
  3. Install lock nut (3).
scientia non olet · About LEMON Manuals