LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 2000 >> Trooper S V6-3.5L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Crankshaft Position Sensor >> Service and Repair
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Crankshaft Position Sensor: Service and Repair





Removal Procedure
1. Disconnect the negative battery cable.
2. Disconnect the electrical connector to the CKP sensor.




3. Remove one bolt and the CKP sensor from the right side of the engine block, just behind the mount.

NOTE: Use caution to avoid any hot oil that might drip out.

Installation Procedure
1. Install the CKP sensor in the engine block.




2. Install the CKP sensor mounting bolt.

Tighten
- Tighten the mounting bolt to 9 Nm (78 lb.in.).

3. Connect the electrical connector to the CKP sensor.
4. Connect the negative "-" battery cable.
scientia non olet · About LEMON Manuals