Cylinder Head Assembly
| Cylinder Head Bolts Do not reuse cylinder head bolts. Do not apply any lubricant to the cylinder head bolts. | Step 1 | 29 Nm (21 ft.lb) |
| Step 2 | 64 Nm (47 ft.lb) | |
| Head Surface and Manifold Surface Flatness | Standard | 0.05 mm (0.002 in) or less |
| Warpage Limit | 0.2 mm (0.0079 in) | |
| Maximum Repairable Limit | 0.2 mm (0.0079 in | |
| Head Height | Standard Height | 133.2 mm (5.2441 in) |
| Warpage Limit | 0.2 mm (0.0079 in) | |
| Maximum Repairable Limit | 133.0 mm (5.2362 in) |