LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 2000 >> Trooper LTD V6-3.5L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Camshaft Position Sensor >> Service and Repair
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Camshaft Position Sensor: Service and Repair

Removal Procedure
1. Disconnect the negative "-" battery cable.
2. Remove the engine cover.




3. Remove the common chamber assembly.




4. Disconnect the electrical connector to the CMP sensor.
5. Remove the CMP retaining bolt from the side of left cylinder head.
6. Remove the CMP sensor from the cylinder head.

Installation Procedure
1. Install the CMP sensor in the cylinder head.
2. Install the CMP sensor retaining bolt.

Tighten
- Tighten the retaining screw to 9 Nm (78 lb.in.).




3. Connect the electrical connector to the CMP sensor.




4. Install the common chamber assembly.
5. Install the engine cover.
6. Connect the negative "-" battery cable.
scientia non olet · About LEMON Manuals