LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 2000 >> Rodeo S 2WD V6-3.2L >> Repair and Diagnosis >> Powertrain Management >> Service and Repair >> Removal and Installation >> Metri-Pack
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Metri-Pack

Tools Required
J 35689 Terminal Remover

REMOVAL PROCEDURE
Some connectors use terminals called Metri-Pack Series 150. These may be used at the engine coolant temperature (ECT) sensor.

1. Slide the seal (1) back on the wire.




2. Insert the J 35689 tool or equivalent (3) in order to release the terminal locking tang (2).
3. Push the wire and the terminal out through the connector. If you reuse the terminal, reshape the locking tang.

scientia non olet · About LEMON Manuals