LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 1998 >> Oasis LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Shift Interlock Systems) >> Component Tests >> Park Pin Switch
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Park Pin Switch

WARNING: This page is about a different car, the 2002 Honda Accord and 2001 Honda Accord. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the center console panel. See CENTER CONSOLE PANEL  under REMOVAL & INSTALLATION.
  2. Disconnect the park pin switch assembly connector.
  3. Shift the gearshift lever into the "P" position, then check for continuity between the A/T shift switch assembly component connector No. 3 and 4 terminals. See Fig 1 . There should be no continuity.
  4. Shift the gearshift lever out of the "P" position, and check for continuity between the A/T shift switch assembly component connector No. 3 and 4 terminals. There should be continuity.
  5. If the park pin switch is faulty, remove the gearshift lever assembly. See GEARSHIFT LEVER ASSEMBLY  under REMOVAL & INSTALLATION. Replace the shift lever bracket base (park pin switch is not available separately).
Fig 1: Identifying Park Pin Switch Connector Terminals
G00086646Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals