DTC 14: Abnormal EBCM Function
- Turn ignition off. Disconnect EBCM harness connector. Inspect EBCM ground circuit and repair as necessary. Using DVOM, check for continuity between ground and EBCM harness connector terminals No. 28, 29 and 30 (Black wires). If continuity is present, go to next step. If continuity is not present, repair body ground harness.
- Turn ignition off. Reconnect EBCM harness connector. Clear DTCs. See CLEARING DIAGNOSTIC TROUBLE CODES under SELF-DIAGNOSTICS in appropriate 4-WHEEL ANTI-LOCK - INTRODUCTION article. Turn ignition on. Perform system self-check. See ANTI-LOCK SYSTEM SELF-CHECK under DIAGNOSIS & TESTING in appropriate 4-WHEEL ANTI-LOCK - INTRODUCTION article. If ABS warning light remains on, retrieve DTCs. If DTC 14 returns, replace EBCM. If any DTC other than DTC 14 is present, perform appropriate self-diagnostic test.