LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 1997 >> Oasis LS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes >> Circuit Tests >> DTC P1107 & P1108: BARO Sensor
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

DTC P1107 & P1108: BARO Sensor

NOTE: DTC P1107 indicates a low voltage problem and DTC P1108 indicates a high voltage problem.

Perform PCM reset procedure. See PCM RESET PROCEDURE/CLEARING DTCS  . Turn ignition on. If DTC P1107 or P1108 is indicated, substitute a known-good PCM and recheck. If neither DTC P1107 or P1108 is indicated, problem is intermittent, system is okay at this time.

scientia non olet · About LEMON Manuals