September 30: LEMON manuals is back up on a temporary server! Slowness is possible

DTC Description

DTC DETECTION LOGIC

DTC	CONSULT screen terms (Trouble diagnosis content)	DTC detecting condition
P2614	A camshaft posi signal B1 ("A" camshaft position signal output circuit/open bank 1)	When the signal voltage of Intake Camshaft Position Sensor is less than 1.0 V or more than 5.8 V for approx. 1 second.

POSSIBLE CAUSE

Harness or connectors
[Intake Camshaft Position Sensor (bank 1) circuit is open or shorted.]
Intake Camshaft Position Sensor (bank 1)

FAIL-SAFE

NOTE: Any of the following fail-safe is applied.

Fail safe mode	Vehicle behavior
Device fix mode	Fixes electric intake valve timing control motor in the reference position. Fixes exhaust valve timing control solenoid valve in the reference position.
Combustion control mode	No stratified charge combustion at starting (cold start).

Fail safe mode	Vehicle behavior
Device fix mode	Fixes electric intake valve timing control motor in the reference position. Fixes exhaust valve timing control solenoid valve in the reference position.
Combustion control mode	Stops feedback control of idle speed and controls with specified speed. Stops recovery speed control by the fuel cut at decelerating and controls with specified speed.