DTC Description
DTC DETECTION LOGIC
| DTC | CONSULT screen terms (Trouble diagnosis content) |
DTC detection condition |
| P0015 | B camshaft position B1 ("B" camshaft position - timing over retarded bank 1) |
During the retarded control of exhaust valve timing control, the angle difference between actual angel and target angle is 13 degrees or more. |
POSSIBLE CAUSE
- Crankshaft position sensor
- Exhaust camshaft position sensor
- Exhaust valve control solenoid valve
- Accumulation of debris to the signal pick-up portion of the camshaft
- Timing chain installation
- Foreign matter caught in the oil groove for exhaust valve timing control
FAIL-SAFE
| Fail safe mode | Vehicle behavior |
|---|---|
| Device fix mode |
|
| Others | ECM stops the electric valve timing control. (The camshaft returns to the position of most retard angle. When VTC mechanism sticks, camshaft position does not change from position of stuck angle.) |