July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Component Inspection

CHECK TURBOCHARGER SPEED SENSOR-1
1. Turn ignition switch OFF.
2. Disconnect turbocharger speed sensor harness connector.
3. Remove turbocharger speed sensor. Refer to TURBOCHARGER : Exploded View .
4. Visually check the sensor for chipping.
Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Replace turbocharger speed sensor. Refer to TURBOCHARGER : Exploded View .

CHECK TURBOCHARGER SPEED SENSOR-2

Check resistance between sensor terminals as follows.

Terminals (Polarity)	Resistance (Ω)
1 - 2	Except 0 or ∞ [at 25°C (77°F)]
1 - 3
2 - 3

Is the inspection result normal?

YES>>

INSPECTION END

NO>>

Replace turbocharger speed sensor. Refer to TURBOCHARGER : Exploded View .