October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal and Installation

REMOVAL

Remove the floor under cover (LH). Refer to Removal and Installation .
Disconnect the harness connector from EVAP canister control pressure sensor.
Remove EVAP canister control pressure sensor and O-ring.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:

Do not reuse O-ring when installing new EVAP canister control pressure sensor. The EVAP canister control pressure sensor and O-ring are serviced as an assembly.