Work Procedure

Vehicle specification needs to be written With CONSULT: because it is not written after replacing the distance sensor. The configuration requires network connection. CONSULT connects to network and then it downloads the configuration data from the server. Then CONSULT writes the vehicle specification to the distance sensor.

NOTE:

For details the network connection and operation, refer to "CONSULT Operation Manual". The configuration no need to "save" configuration data from the distance sensor. The configuration data is always generated freshly at the server and then downloaded to the CONSULT.

CAUTION:

Complete the procedure of "Configuration" in order.
If incorrect "Configuration", incidents might occur.

WRITING VEHICLE SPECIFICATION
1. With CONSULT: Perform writing vehicle specification to distance sensor following "Automatic Configuration" procedure of "Configuration" according to CONSULT Operation Manual.
  NOTE:
  - Log in the network according to CONSULT guidance.
  - For details the network connection and operation, refer to "CONSULT Operation Manual".
>>

WORK END