Work Flow

OVERALL SEQUENCE 

Courtesy of NISSAN

• Reference 1... Refer to CONSULT Function .
• Reference 2... Refer to DTC Index .
• Reference 3... Refer to Symptom Table ).

DETAILED FLOW 

1. INTERVIEW AND SYMPTOM CONFIRMATION 
   1. Check the malfunction symptoms by performing the following items:
      • Interview the customer to obtain the malfunction information (conditions and environment when the malfunction occurred).
      • Check the symptom.

   Is the occurred symptom malfunction?

   YES>>

   GO TO 2.

   NO>>

   Inspection End.

2. DIAGNOSIS WITH CONSULT 
   1. CONSULT
      1. Select Self-Diagnostic Result" mode of "MULTI AV". Refer to CONSULT Function .
         NOTE: Skip to step 4 of the diagnosis procedure if "MULTI AV" is not displayed.
      2. When DTC is detected, Record DTC and Freeze Frame Data.

   Is DTC displayed?

   YES>>

   GO TO 3.

   NO>>

   GO TO 4.

3. TROUBLE DIAGNOSIS FOR DTC 
   1. CONSULT
      1. Check the DTC indicated in the "Self Diagnostic Result".
      2. Perform the relevant diagnosis referring to the DTC Index. Refer to DTC Index .

   >>

   GO TO 5.

4. TROUBLE DIAGNOSIS FOR SYMPTOMS 
   1. Perform the relevant diagnosis referring to the diagnosis chart by symptom. Refer to Symptom Table .

   >>

   GO TO 5.

5. ERROR PART REPAIR 
   1. CONSULT
      1. Repair or replace the identified malfunctioning parts.
      2. Select "Self Diagnostic Result" mode of "MULTI AV".
         NOTE: Erase the stored self-diagnosis results after repairing or replacing the relevant components if any DTC has been indicated in the "Self-Diagnosis Results".
      3. Check that the symptom does not occur.

   Does the symptom occur?

   YES>>

   GO TO 1.

   NO>>

   Inspection End.