Symptom Table
|
Symptoms |
Check items |
Probable malfunction location |
|
|
Screen is not switched to camera image, when camera switch is pressed and when shift position is shifted to the reverse position. |
"AVM" is not displayed on the system selection screen of CONSULT. |
Around view monitor control unit power supply circuit |
|
|
Check that the following "DATA MONITOR" items operate normally using CONSULT
|
"CAMERA SWITCH SIGNAL" and "REVERSE SIGNAL" are normal |
Around view monitor control unit |
|
|
"CAMERA SWITCH SIGNAL" or "REVERSE SIGNAL" is not normal |
CAN communication |
||
|
Screen is switched when pressing camera switch or shifting selector lever to the reverse position, however, all views are not displayed. |
Only superimposing is displayed (only images that AV control unit plots are displayed). |
LVDS (between around view monitor control unit and each camera) |
|
|
Superimposing is not displayed. |
AV control unit or LVDS (between around view monitor control unit and AV control unit) |
||
|
The screen is not switched to the rear view image even if the selector is shifted to the reverse position. |
The front view is displayed normally. |
CAN communication (Reverse signal) |
|
|
Check the following "DATA MONITOR" items using CONSULT.
|
NG |
LVDS (between front camera and around view monitor control unit) |
|
OK |
Front camera |
||
|
Check the following "DATA MONITOR" items using CONSULT.
|
NG |
LVDS (between rear camera and around view monitor control unit) |
|
OK |
Rear camera |
||
|
Check the following "DATA MONITOR" items using CONSULT.
|
NG |
LVDS (between side camera LH and around view monitor control unit) |
|
OK |
Side camera LH |
||
|
Right side of top view image is not displayed. |
Check the following "DATA MONITOR" items using CONSULT.
|
NG |
LVDS (between side camera RH and around view monitor control unit) |
|
OK |
Side camera RH |
||