October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Direct Adaptive Steering System

When removing the 12V battery negative terminal, initialize is required for operating the direct adaptive steering normally.

CAUTION: When replacing the direct adaptive steering component parts, perform the corresponding work. Refer to Work Procedure .

DIRECT ADAPTIVE STEERING INITIALIZE
1. Set the steering wheel to the straight-ahead position.
2. Connect 12V battery terminal.
3. Start the engine.
  CAUTION: Never drive the vehicle.
4. Turn the steering wheel from full left stop to full right stop.
5. Confirm the condition of turning the steering wheel is normal.
WORK END