Camera Image Operation Principle
- If the information written to around view monitor control unit and the information from the camera do not match, the applicable camera position is indicated as an error on the Birds-Eye view display. (Calibration operation is necessary when replacing each camera or when replacing around view monitor control unit.)
- Around view monitor control unit receives the camera switch signal from multifunction switch via CAN communication by pressing the "CAMERA" button.
- Around view monitor control unit that receives the camera button signal supplies the power to each camera and inputs the camera image from each camera.
- When the shift lever switch is in the reverse position, around view monitor control unit receives the reverse signal, supplies the power to each camera, and inputs the camera image from each camera.
- Around view monitor control unit that receives the camera image signal from each camera cuts out the required screen for each view, superimposes the camera image, vehicle icon, guiding lines, sonar indicator and "MOD" icon and outputs them to the display control unit.