October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Precautions for Harness Repair
- Solder the repaired area and wrap tape around the soldered area.
 Courtesy of NISSAN NORTH AMERICA, INC.
|
NOTE:
A fray of twisted lines must be within 110 mm (4.33 in).
- Bypass connection is never allowed at the repaired area.
 Courtesy of NISSAN NORTH AMERICA, INC.
|
NOTE:
Bypass connection may cause CAN communication error. The spliced wire becomes separated and the characteristics of twisted line are lost.
- Replace the applicable harness as an assembly if error is detected on the shield lines of CAN communication line.