Work Procedure
WARNING: This page is about a different car, the 2020 Infiniti QX80. However, it is still accessible from the selected car via links, so may be relevant.
The ignition battery saver system can be temporarily disabled, without using CONSULT, to prevent it from functioning when performing trouble diagnosis.
- Enter the vehicle carrying a registered Intelligent Key.
- Place the ignition switch in the ACC position by operating the push-button ignition switch without depressing the brake pedal.
- Press and hold the push button ignition switch continuously for ten seconds.
- Check that the buzzer in the combination meter sounds for two seconds.
- Operation is completed.NOTE: When the ignition switch is placed in any position other than ON, the ignition battery saver system is activated again.