LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2017 >> QX80 Base, AWD >> Repair and Diagnosis >> Steering >> Steering Control Systems >> Ecu Diagnosis Information >> Power Steering Control Unit >> Reference Value >> Physical Values
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Physical Values

Terminal No.
(Wire color)		 Description Condition Value (Approx.)
+ - Signal name Input/Output
1
(R)		 Ground Power steering solenoid valve control voltage Output Vehicle speed: 0 km/h (0 MPH)
(Engine is running)		 4.4 - 6.6 V
Vehicle speed: 100 km/h (62 MPH) 2.4 - 3.6 V
3
(GR)		 Ground Ignition switch power supply Input Ignition switch: ON Battery voltage
Ignition switch: OFF 0 V
5
(L)		 Ground Power steering solenoid valve ground - Always 0 V
6
(B)		 Ground Ground - Always 0 V
8
(SB)		 Ground Vehicle speed signal Input Vehicle speed: 40 km/h (25 MPH)
CAUTION:

Check air pressure of tire under standard condition.
NOTE:

The maximum voltage varies depending on the specification (destination unit).

GNSJSNIA0015GB-015Courtesy of NISSAN NORTH AMERICA, INC.
10
(B/SB)		 Ground Engine speed signal Input Engine is running
  • Warm-up condition
  • Idle speed
GNSJPBIA3352ZZ-352Courtesy of NISSAN NORTH AMERICA, INC.
Engine is running
  • Warm-up condition
  • Engine speed: Approx. 2, 000 rpm
GNSJPBIA3354ZZ-354Courtesy of NISSAN NORTH AMERICA, INC.
CAUTION:

When using circuit tester or oscilloscope to measure voltage for inspection, be sure not to forcibly extend any connector terminals.

scientia non olet · About LEMON Manuals