Revised Wheel Alignment Specifications (ITB16-046A)

Publication date: 2018-04-20
Reference number: ITB16-046A
Supersedes refnos: ITB16-046

REVISED WHEEL ALIGNMENT SPECIFICATIONS

TECHNICAL SERVICE BULLETIN

Reference Number(s): ITB16-046a, Date of Issue: April 20, 2018

INFINITI:	2017 - 2018 Q60; 2016 - 2018 Q50, Q50 Hybrid, Q70, Q70 Hybrid; 2016 - 2017 QX50, QX80
CLASSIFICATION:	FA16-003a
APPLIED VEHICLES:	2017 - 2018 Q60 (V37); 2016 - 2018 Q50 (V37), Q50 Hybrid (V37), Q70 (Y51), Q70 Hybrid (Y51); 2016 - 2017 QX50 (J50), QX80 (Z62)

NOTE: This bulletin has been amended. The APPLIED VEHICLES were updated with new models and model years. No other changes have been made. Discard previous versions of this bulletin.

APPLIED VEHICLES

2017 - 2018 QX30 (H15)

2017 - 2018 Q60 (V37)

2016 - 2018 Q50 (V37)

2016 - 2018 Q50 Hybrid (V37)

2016 - 2018 Q70 (Y51)

2016 - 2018 Q70 Hybrid (Y51)

2016 - 2017 QX50 (J50)

2016 - 2017 QX80 (Z62)

SERVICE INFORMATION

For the Applied Vehicles listed above, some front and rear wheel alignment specifications listed in the Electronic Service Manual (ESM), sections - Front Suspension and Rear Suspension, were listed incorrectly.

Updated ESMs will be distributed to the field as quickly as possible.
Until the updated ESMs are made available, please use the corrected specifications listed in this bulletin.
Specification areas that have corrections are outlined with a Red box on the following pages.

2017 - 2018 QX30 2WD 2.0L TURBO

Front Wheel Alignment Specifications

FRONT WHEEL ALIGNMENT SPECIFICATIONS

Item

Standard

Grade

Base Leather Premium Base + Leather

Sport S Premium S

Camber
Degree minute (Decimal degree)

Minimum

-1° 35'(-1.58°)

-1° 45'(-1.75°)

Nominal

-0° 60° (-0.83°)

-1° 00'(-1.00°)

Maximum

-0° 05'(-0.09°)

-0° 15'(-0.25°)

Left and right difference⁽¹⁾

-0°30'(-0.50°)-0° 30' (0.50°)

Caster
Degree minute (Decimal degree)

Minimum

5° 30' (5.50°)

5° 50' (5.84°)

Nominal

6° 15'(6.25°)

6°35'(6.58°)

Maximum

7°00'(7.001°)

7° 20' (7.33°)

Left and right difference⁽¹⁾

0° 30' (-0 50°) - 0° 30' (0.50°)

Kingpin inclination
Degree minute (Decimal degree)

Minimum

9° 45' (9.75°)

9° 55'(9.92°)

Nominal

10° 30'(10.50°)

10° 40'(10.67°)

Maximum

11° 15' (11-25°)

11° 25' (11.41°)

Toe-in

Total toe-in Distance

Minimum

0.2mm

Nominal

2.7mm

Maximum

5.2mm

Total toe angle
Degree minute
(Decimal Degree)

Minimum

In 0° 12";(In 0.02°)

In 0°01'12";(In 0.02°)

Nominal

In 0°13'48";(In 0.23°)

Maximum

In 0°26'24";(In 0.44°)

Measure value under unladen⁽²⁾ conditions.

⁽¹⁾	A difference when assuming the left side a standard.

⁽²⁾	Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.

2017 - 2018 QX30 AWD 2.0L TURBO

Front Wheel Alignment Specifications

FRONT WHEEL ALIGNMENT SPECIFICATIONS

Item

Standard

Camber
Degree minute (Decimal degree)

Minimum

-1° 15'(-1.25°)

Nominal

-1° -30' (-0.50°)

Maximum

0° 15' (0.25°)

Left and rig hit difference⁽¹⁾

-0° 30' (-0.50°) - 0° 30' (0.50°)

Caster
Degree minute (Decimal degree)

Minimum

5° 10' (5.17°)

Nominal

5° 55' (5.92°)

Maximum

6° 40' (6.66°)

Left end right difference⁽¹⁾

-0° 30' (-0.50°) - 0° 30' (0.50°)

Kingpin inclination
Degree minute (Decimal degree)

Minimum

9° 25' (9.42°)

Nominal

10° 10' (10.17°)

Maximum

10° 55' (10.91°)

Toe-in

Total toe-in Distance

Minimum

0.2mm

Nominal

2.7mm

Maximum

5.2mm

Total toe angle Degree minute (Decimal Degree)

Minimum

In 0°01'12";(In 0.02°)

Nominal

In 0°13'48";(In 0.23°)

Maximum

In 0°26'24";(In 0.44°)

Measure value under unladen⁽²⁾ conditions.

⁽¹⁾	A difference when assuming the left side a standard.

⁽²⁾	Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.

2017 - 2018 QX30

Rear Wheel Alignment Specifications

2WD 2.0L Turbo Engine - EXCEPT Canada

REAR WHEEL ALIGNMENT SPECIFICATIONS

Item

Standard

Grade

Base
Leather
Premium
Base + Leather

Sport
S Premium
S

Camber
Degree minute (Decimal degree)

Minimum

-1° 15'(-1.25°)

-1° 45'(-1.75°)

Nominal

-0° 45' (-0.75°)

-1° 15'(-1.25°)

Maximum

-0° 15'(-0.25°)

-0° 45'(-0.75°)

Toe-in

Total toe-in
Distance

Minimum

Out 1.6 mm (Out 0.063 in)

Out 0.8 mm (Out 0.031 in)

Nominal

In 0.4 mm (In 0.016 in)

In 1.2 mm (In 0.047 in)

Maximum

In 2.4 mm (In 0.094 in)

In 3.2 mm (In 0.126 in)

Total toe-angle
Degree minute (Decimal degree)

Minimum

Out 0° 06' 36' (Out 0.11°)

In 0° 02' 24' (In 0.04°)

Nominal

In 0° 01' 48° (In 0.03°)

In 0° 05' 00"; (In 0.10°)

Maximum

In 0° 10' 12° (In 0.17°)

In 0° 14' 24"; (In 0.24°)

Measure value under unladen⁽¹⁾ conditions.

⁽¹⁾	Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.

2WD 2.0L Turbo Engine - Canada

REAR WHEEL ALIGNMENT SPECIFICATIONS

Item

Standard

Grade

Base Leather Premium Base + Leather

Sport S Premium

Camber
Degree minute (Decimal degree)

Minimum

-1° 15'(-1.25°)

-1° 45' (-1.75°)

Nominal

-0° 45' (-0.75°)

-1° 15' (-1.25°)

Toe-in

Total toe-in
Distance

Minimum

Out 1.7 mm (Out 0.067 in)

Out 0.8 mm (Out 0,031 in)

Nominal

In 0.3 mm (In 0.012 in)

In 1.2 mm (In 0.047 in)

Maximum

In 2,3 mm (In 0.091 in)

In 3.2 mm (In 0.126 in)

Total toe-angle
Degree minute
(Decimal degree)

Minimum

Out 0° 06' 36"; (Out 0.11°)

In 0° 02' 24"; (In 0.04°)

Nominal

In 0° 01' 48° (In 0.03";)

In 0° 0° 06° (In 0.10°)

Maximum

In 0° 10' 12° (In 0.17°)

In 0° 14' 24"; (In 0.24°)

Measure value under unladen⁽¹⁾ conditions.

⁽¹⁾	Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.

2017 - 2018 QX30

Rear Wheel Alignment Specifications

AWD

AWD 2.0L Turbo Engine - EXCEPT Canada

REAR WHEEL ALIGNMENT SPECIFICATIONS

Standard

Camber
Degree minute (Decimal degree)

Minimum

-1° 20'(-1.33°)

Nominal

-0° 50'(-0.83°)

Maximum

-0° 20' (-0.34°)

Toe-in

Total toe-in
Distance

Minimum

Out 1.5 mm (Out 0.059 in)

Nominal

In 0.5 mm (In 0.020 in)

Maximum

In 2.5 mm (In 0.098 in)

Total toe-angle
Degree minute
(Decimal decree)

Minimum

Out 0° 06' 00' (Out 0,10°)

Nominal

In 0° 02' 24' (In 0.04°)

Maximum

In 0° 10' 48"; (In 0.18°)

Measure value under unladen⁽¹⁾ conditions.

⁽¹⁾	Fuel, engine coolant and lubricant are full, spare tire, jack, hand tools and mats are in designated positions.

AWD 2.0L Turbo Engine - Canada

REAR WHEEL ALIGNMENT SPECIFICATIONS

Standard

Base

Premium

Camber
Degree minute (Decimal degree)

Minimum

-1° 15'(-1.25°)

-1° 20'(-1.33°)

Nominal

-0° 45'(-0.75°)

-0° 50'(-0.83°)

Maximum

-0° 15' (-0.25°)

-0° 20' (-0.34°)

Toe-in

Total toe-in
Distance

Minimum

Out 1.6 mm (Out 0.063 in)

Out 1.5 mm (Out 0.059 in)

Nominal

In 0.4 mm (In 0.010 in)

In 0.5 mm (In 0.020 in)

Maximum

In 2.4 mm (In 0.094 in)

In 2.5 mm (In 0.098 in)

Total toe-angle
Degree minute
(Decimal degree)

Minimum

Out 0°06' 00° (Out 0,10°)

Nominal

In 0° 02' 24"; (In 0.04°)

Maximum

In 0° 10' 4"; (In 0.18°)

Measure value under unladen⁽¹⁾ conditions.

⁽¹⁾	Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.

2017 - 2018 Q60 2WD EXCEPT VR30DDTT

Front Wheel Alignment Specifications

FRONT WHEEL ALIGNMENT SPECIFICATIONS

Item			Standard
Camber Degree minute (Decimal degree)		Minimum	-1° 20'(-1.33°)
		Nominal	-0° 35' (-0.53°)
		Maximum	0° 10' (0.16°)
		Left and right difference	0°30' (0.50°) or less
Caster Degree minute (Decimal degree)		Minimum	3° 10'(3.17°)
		Nominal	4° 30' (4.50°)
		Maximum	5° 50' (5.83°)
		Left and right difference	0° 30' (0.50°) or less
Kingpin inclination Degree minute (Decimal degree)		Minimum	6° 45' (6.75°)
		Nominal	7° 30' (7.50°)
		Maximum	8° 15' (18.25°)
Toe-in	Total toe-in Distance	Minimum	-0.5mm
		Nominal	2.0mm
		Maximum	4.5mm
	Total toe angle Degree minute (Decimal Degree)	Minimum	Out 0°03'(Out 0.04°)
		Nominal	In 0°10' (In 0.17°)
		Maximum	In 0°23' (In 0.38°)
*: Fuel, engine coolant and lubricant are full, Spare tire, jack, hand tools and mats are in designated positions.

2017 - 2018 Q60 2WD VR30DDTT

Front Wheel Alignment Specifications

FRONT WHEEL ALIGNMENT SPECIFICATIONS

Item

Standard

Camber
Degree minute (Decimal degree)

Minimum

-1° 10' (-1.16°)

Nominal

-0° 25' (-0.42°)

Maximum

0° 20'(0.33°)

Left and right difference

0° 30'(0.50°) or less

Caster
Degree minute (Decimal degree)

Minimum

3° 30' (3.50°)

Nominal

4° 50'(4.83°)

Maximum

6° 10'(6.16°)

Left and right difference

0° 30' (0.50°) or less

Kingpin inclination
Degree minute (Decimal degree)

Minimum

6° 40' (6.67°)

Nominal

7° 25' (7.42°)

Maximum

8° 10'(8.16°)

Toe-in

Total toe-in
Distance

Minimum

-0.5mm

Nominal

2.0mm

Maximum

4.5mm

Total toe angle
Degree minute
(Decimal Degree)

Minimum

Out 0°03'(Out 0.04°)

Nominal

In 0°10'(In 0.17°)

Maximum

In 0°23'(In 0.38°)

Measure value under unladen⁽¹⁾ conditions.

⁽¹⁾	Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.

2017 - 2018 Q60 AWD 2.0L Turbo

FRONT WHEEL ALIGNMENT SPECIFICATIONS

Item

Standard

Camber
Degree minute (Decimal degree)

Minimum

-1° 20'(-1.33°)

Nominal

-0° 35' (-0.58°)

Maximum

0° 10'(0.16°)

Left and right difference

0° 30' (0.50°) or less

Caster
Degree minute (Decimal degree)

Minimum

3° 10' (3.17°)

Nominal

4° 30' (4.50°)

Maximum

5° 50' (5.83°)

Left and right difference

0° 30'(0.50°) or less

Kingpin inclination
Degree minute (Decimal degree)

Minimum

6° 45'{6.75°)

Nominal

7° 30' (7.50°)

Toe-in

Total toe-in
Distance

Minimum

-0.5mm

Nominal

2.0mm

Maximum

4.5mm

Total toe angle Degree minute
(Decimal Degree)

Minimum

Out 0°03'(Out 0.04°)

Nominal

In 0°10'(In 0.17°)

Maximum

In 0°23'(In 0.38°)

Measure value under unladen⁽¹⁾ conditions.

⁽¹⁾	Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.

2017 - 2018 Q60 VR30DDTT

Front Wheel Alignment Specifications

FRONT WHEEL ALIGNMENT SPECIFICATIONS

Item

Standard

Camber
Degree minute (Decimal degree)

Minimum

-1° 20'(-1.33°)

Nominal

-0° 35' (-0.53°)

Maximum

0° 10' (0.16°)

Left and right difference

0° 30' (0.50°) or less

Caster
Degree minute (Decimal degree)

Minimum

3° 05' (3.09°)

Nominal

4° 25' (4.42°)

Maximum

5° 45' (5.75°)

Left and right difference

0°30' (0.50°) or less

Kingpin inclination
Degree minute (Decimal degree)

Minimum

6° 45' (6.75°)

Nominal

7° 30' (7.50°)

Maximum

8° 15'(8.25°)

Toe-in

Total toe-in
Distance

Minimum

-0.5mm

Nominal

2.0mm

Maximum

4.5mm

Total toe angle Degree
minute (Decimal Degree)

Minimum

Out 0°03' (Out 0.04°)

Nominal

In 0°10'(In 0.17°)

Maximum

In 0°23'(In 0.38°)

Measure value under unladen⁽¹⁾ conditions.

⁽¹⁾	Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.

2016 - 2018 Q50 2WD VR30DDTT

Front Wheel Alignment Specifications

EXCEPT FOR PREMIUM SPORT GRADE

FRONT WHEEL ALIGNMENT SPECIFICATIONS

Item

Standard

Camber
Degree minute (Decimal degree)

Minimum

-1° 10'(-1.16°)

Nominal

-0° 25' (-0.42°)

Maximum

0° 20' (0.33°)

Left and right difference

0° 30' (0.50°) or less

Caster
Degree minute (Decimal degree)

Minimum

3° 15' (3.25°)

Nominal

4° 35' (4.58°)

Maximum

5° 55'(5.91°)

Left and right difference

0° 30' (0.50°) or less

Kingpin inclination
Degree minute (Decimal degree)

Minimum

6° 40' (6.67°)

Nominal

7° 25' (7.42°)

Toe-in

Total toe-in
Distance

Minimum

-0.5mm

Nominal

2.0mm

Maximum

4.5mm

Total toe angle
Degree minute
(Decimal Degree)

Minimum

Out 0°03'(Out 0.04°)

Nominal

In 0°10'(In 0.17°)

Maximum

In 0°23'(In 0.38°)

Measure value under unladen⁽¹⁾ conditions.

⁽¹⁾	Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.

2016 - 2018 Q50 2WD VR30DDTT

Front Wheel Alignment Specifications

FOR PREMIUM SPORT GRADE

FRONT WHEEL ALIGNMENT SPECIFICATIONS

Item

Standard

Tire Size

Front

245/40RF19

Rear

265/35RF19

Camber
Degree minute (Decimal degree)

Minimum

-1° 05' (-1.08°)

Nominal

-0° 20' (-0.33°)

Maximum

0° 25'(0.41°)

Left and right difference

0° 30' (0.50°) or less

Caster
Degree minute (Decimal degree)

Minimum

3° 20' (3.34°)

3° 25' (3.42°)

Nominal

4° 40' (4.67°)

4° 45' (4.75°)

Maximum

6° 00' (6.00° >

6° 05' (6.08°)

Left and right difference

0° 30' (0.50°) or less

Kingpin inclination
Degree minute (Decimal degree)

Minimum

6° 35' (6.59°)

Nominal

7° 20' (7.33°)

Maximum

8° 05' (8.08°)

Tire Size

Front

245/40RF19

Rear

265/35RF19

Toe-in

Total toe-in
Distance

Minimum

-0.5mm

Nominal

2.0mm

Maximum

4.5mm

Total toe angle Degree minute (Decimal Degree)

Minimum

Out 0°03'(Out 0.04°)

Nominal

In 0°10'(In 0.17°)

Maximum

In 0°23'(In 0.38°)

Measure value under unladen⁽¹⁾ conditions.

⁽¹⁾	Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.

2017 - 2018 Q50 2WD (EXCEPT VR30DDTT)

Front Wheel Alignment Specifications

FRONT WHEEL ALIGNMENT SPECIFICATIONS

Item

Standard

Camber
Degree minute (Decimal degree)

Minimum

-1° 20'(-1.33°)

Nominal

-0° 35' (-0.58°)

Maximum

0° 10' (0.16°)

Left and right difference

0° 30' (0.50°) or less

Caster
Degree minute (Decimal degree)

Minimum

3° 00' (3.00°)

Nominal

4° 2D' (4.33°)

Maximum

5° 40' (5.66°)

Left and right difference

0° 30' (0.50°) or less

Kingpin inclination
Degree minute (Decimal degree)

Minimum

6° 45' (6.75°)

Nominal

7° 30'(7.50°)

Maximum

8° 15' (8.25°)

Toe-in

Total toe-in
Distance

Minimum

-0.5mm

Nominal

2.0mm

Maximum

4.5mm

Total toe angle Degree minute
(Decimal Degree)

Minimum

Out 0°03'(Out 0.04°)

Nominal

In 0°10'(In 0.17°)

Maximum

In 0°23'(In 0.38°)

Measure value under unladen⁽¹⁾ conditions.

⁽¹⁾	Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.

2017 - 2018 Q50 AWD 2.0L TURBO

Front Wheel Alignment Specifications

FRONT WHEEL ALIGNMENT SPECIFICATIONS

Item

Standard

Camber
Degree minute (Decimal degree)

Minimum

-1° 20' (-1.33°)

Nominal

-0° 35' (-0.58°)

Maximum

0° 10' (0.16°)

Left and right difference

0° 30' (0.50°) or less

Caster
Degree minute (Decimal degree)

Minimum

3° 00' (3.00°)

Nominal

4° 20' (4.33°)

Maximum

5° 40' (5.66°)

Left and right difference

0° 30' (0.50°) or less

Kingpin inclination
Degree minute (Decimal degree)

Minimum

6° 45' (6.75°)

Nominal

7° 30' (7.50°)

Maximum

8° 15' (8.25°)

Toe-in

Total toe-in
Distance

Minimum

-0.5mm

Nominal

2.0mm

Maximum

4.5mm

Total toe angle Degree minute
(Decimal Degree)

Minimum

Out 0°03'(Out 0.04°)

Nominal

In 0°10'(In 0.17°)

Maximum

In 0°23'(In 0.38°)

Measure value under unladen⁽¹⁾ conditions.

⁽¹⁾	Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.

2017 - 2018 Q50 AWD VR30DDTT

Front Wheel Alignment Specifications

FRONT WHEEL ALIGNMENT SPECIFICATIONS

Item

Standard

Camber
Degree minute (Decimal degree)

Minimum

-1° 20' (-1.33°)

Nominal

-0° 35' (-0.58°)

Maximum

0° 10' (0.16°)

Left and right difference

0° 30' (0.50°) or less

Caster
Degree minute (Decimal degree)

Minimum

2° 55' (2.92°)

Nominal

4° 15' (4.25°)

Maximum

5° 35' (5.58°)

Left and right difference

0° 30' (0.50°) or less

Kingpin inclination
Degree minute (Decimal degree)

Minimum

6° 45' (6.75°)

Nominal

7° 30' (7.50°)

Maximum

8° 15' (8.25°)

Toe-in

Total toe-in
Distance

Minimum

-0.5mm

Nominal

2.0mm

Maximum

4.5mm

Total toe angle Degree minute
(Decimal Degree)

Minimum

Out 0°03'(Out 0.04°)

Nominal

In 0°10'(In 0.17°)

Maximum

In 0°23'(In 0.38°)

Measure value under unladen⁽¹⁾ conditions.

⁽¹⁾	Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.

2016 - 2018 Q50 HYBRID 2WD

Front Wheel Alignment Specifications

FRONT WHEEL ALIGNMENT SPECIFICATIONS

Item

Standard

Camber
Degree minute (Decimal degree)

Minimum

-1° 05'(-1.08°)

Nominal

-0° 20' (-0.33°)

Maximum

0° 25' (0.41°)

Left and right difference

0°33' (0.55°) or less

Caster
Degree minute (Decimal degree)

Minimum

3° 20' (3.34°)

Nominal

4° 40' (4.62°)

Maximum

6° 00' (6.00°)

Left and right difference

0°39' (0.65°) or less

Kingpin inclination
Degree minute (Decimal degree)

Minimum

6° 35' (6.59°)

Nominal

7° 20' (7.33°)

Maximum

8° 05' (8.08°)

Toe-in

Total toe-in
Distance

Minimum

-0.5mm

Nominal

2.0mm

Maximum

4.5mm

Total toe angle Degree minute
(Decimal Degree)

Minimum

Out 0°03'(Out 0.04°)

Nominal

In 0°10'(In 0.17°)

Maximum

In 0°23'(In 0.38°)

Measure value under unladen⁽¹⁾ conditions.

⁽¹⁾	Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.

2016 - 2018 Q50 HYBRID AWD

Front Wheel Alignment Specifications

FRONT WHEEL ALIGNMENT SPECIFICATIONS

Item

Standard

Camber
Degree minute (Decimal degree)

Minimum

-1° 15' (-1.25°)

Nominal

-0° 30' (-0.50°)

Maximum

0° 15' (0.25°)

Left and right difference

0° 33' (0.55°) or less

Caster
Degree minute (Decimal degree)

Minimum

3° 00' (3.00°)

Nominal

4° 20' (4.33°)

Maximum

5° 40' (5.66°)

Left and right difference

0° 30' (0.50°) or less

Kingpin inclination
Degree minute (Decimal degree)

Minimum

6° 45' (6.75°)

Nominal

7° 30' (7.50°)

Maximum

8° 15' {8.25°)

Toe-in

Total toe-in
Distance

Minimum

-0.5mm

Nominal

2.0mm

Maximum

4.5mm

Total toe angle Degree minute
(Decimal Degree)

Minimum

Out 0°03'(Out 0.04°)

Nominal

In 0°10'(In 0.17°)

Maximum

In 0°23'(In 0.38°)

Measure value under unladen⁽¹⁾ conditions.

⁽¹⁾	Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.

2016 - 2018 Q70 HYBRID

Front Wheel Alignment Specifications

FRONT WHEEL ALIGNMENT SPECIFICATIONS

Item

Standard

Camber
Degree minute (Decimal degree)

Minimum

-0° 55'(-0.91°)

Nominal

-0° 10' (-0.17°)

Maximum

0° 35' (0.58°)

Left and right difference

0° 33' (0.55°) or less

Caster
Degree minute (Decimal degree)

Minimum

3° 10'(3.17°)

Nominal

4° 30' (4.50°)

Maximum

5° 50' (5.83°)

Left and right difference

0° 39' (0.65°) or less

Kingpin inclination
Degree minute (Decimal degree)

Minimum

6° 25' (6.42°)

Nominal

7° 10' (7.17°)

Maximum

7° 55'(7.91°)

Toe-in

Total toe-in
Distance

Minimum

-1.0mm

Nominal

1.5mm

Maximum

4.0mm

Total toe angle Degree minute
(Decimal Degree)

Minimum

Out 0°05'(Out 0.08°)

Nominal

In 0°08'(In 0.13°)

Maximum

In 0°20'(In 0.33°)

Measure value under unladen⁽¹⁾ conditions.

⁽¹⁾	Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.

2016 - 2017 Q70

Front Wheel Alignment Specifications 2WD

FRONT WHEEL ALIGNMENT SPECIFICATIONS

Item

Standard

Grade

Except Sport^*2

Sport^*2

Wheel size

18 inch

20 inch

Camber
Degree minute (Decimal degree)

Minimum

-0° 55'(-0.91°)

-1°00' (-1.000)

Nominal

-0° 10'(-0.17°)

-0° 15'(-0.25°)

Maximum

0° 35' (0.58°)

0° 30' (0.50°)

Left and right difference

0° 33'(0.55°) or less

Caster
Degree minute (Decimal degree)

Minimum

3° 10' (3.17°)

Nominal

4° 30' (4.50°)

Maximum

5° 50'(5.83°)

Left and right difference

0° 39'(0.65°) or less

Kingpin inclination
Degree minute (Decimal degree)

Minimum

6° 25' (6.42°)

6° 30'(6.50°)

Nominal

7° 10' (7.17°)

7° 15'(7.25°)

Maximum

7° 55' (7.91°)

8° 00' (8.00°)

Toe-in

Total toe-in
Distance

Minimum

-1.0mm

Nominal

1.5mm

Maximum

4.0mm

Total toe angle
Degree minute
(Decimal Degree)

Minimum

Out 0°05'(Out 0.08°)

Nominal

In 0°07'(In 0.12°)

Maximum

In 0°20'(In 0.33°)

Measure value under unladen⁽¹⁾ conditions.

⁽¹⁾	Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.

2016 - 2017 Q70

Front Wheel Alignment Specifications

AWD

FRONT WHEEL ALIGNMENT SPECIFICATIONS

Item

Standard

Camber
Degree minute (Decimal degree)

Minimum

-0° 50' (-0.83°)

Nominal

-0° 05' (-0.08°)

Maximum

0° 40'(0.66°)

Left and right difference

0° 33'(0.55°) or less

Caster
Degree minute (Decimal degree)

Minimum

2° 40' (2.67°)

Nominal

4° 00' (4.00°)

Maximum

5° 20' (5.33°)

Left and right difference

0° 39'(0.65°) or less

Kingpin inclination
Degree minute (Decimal degree)

Minimum

6° 20' (6.34°)

Nominal

7° 05' (7.08°)

Maximum

7° 50' (7.83°)

Toe-in

Total toe-in
Distance

Minimum

-1.0mm

Nominal

1.5mm

Maximum

4.0mm

Total toe angle
Degree minute
(Decimal Degree)

Minimum

Out 0°05'(Out 0.08°)

Nominal

In 0°08'(In 0.13°)

Maximum

In 0°20'(In 0.33°)

Measure value under unladen⁽¹⁾ conditions.

⁽¹⁾	Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.

2018 Q70

Front Wheel Alignment Specifications

2WD

FRONT WHEEL ALIGNMENT SPECIFICATIONS

Item

Standard

Grade

Except Sport^*2

Sport^*2

Wheel size

18 inch

20 inch

Camber
Degree minute (Decimal degree)

Minimum

-0° 55'(-0.91°)

-1°00' (-1.000)

Nominal

-0° 10'(-0.17°)

-0° 15'(-0.25°)

Maximum

0° 35' (0.58°)

0° 30' (0.50°)

Left and right difference

0° 33'(0.55°) or less

Caster
Degree minute (Decimal degree)

Minimum

3° 10' (3.17°)

Nominal

4° 30' (4.50°)

Maximum

5° 50'(5.83°)

Left and right difference

0° 39'(0.65°) or less

Kingpin inclination
Degree minute (Decimal degree)

Minimum

6° 25' (6.42°)

6° 30'(6.50°)

Nominal

7° 10' (7.17°)

7° 15'(7.25°)

Maximum

7° 55' (7.91°)

8° 00' (8.00°)

Toe-in

Total toe-in
Distance

Minimum

-1.0mm

Nominal

1.5mm

Maximum

4.0mm

Total toe angle
Degree minute
(Decimal Degree)

Minimum

Out 0°05'(Out 0.08°)

Nominal

In 0°07'(In 0.12°)

Maximum

In 0°20'(In 0.33°)

Measure value under unladen ⁽¹⁾ conditions.

⁽¹⁾	Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.

2018 Q70

Front Wheel Alignment Specifications

AWD

FRONT WHEEL ALIGNMENT SPECIFICATIONS

Item

Standard

Camber
Degree minute {Decimal degree)

Minimum

-0° 50' (-0.83°)

Nominal

-0° 05' (-0.08°)

Maximum

0° 40'(0.66°)

Left and right difference

0° 33'(0.55°) or less

Caster
Degree minute (Decimal degree)

Minimum

2° 40' (2.67°)

Nominal

4° 00'(4.00°)

Maximum

5° 20' (5.33°)

Left and right difference

0° 39'(0.65°) or less

Kingpin inclination
Degree minute {Decimal degree)

Minimum

6° 20'(6.34°)

Nominal

T 05' (7.08°)

Maximum

7° 50' (7.83°)

Toe-in

Total toe-in
Distance

Minimum

-1.0mm

Nominal

1.5mm

Maximum

4.0mm

Total toe angle
Degree minute
(Decimal Degree)

Minimum

Out 0°05'(Out 0.08°)

Nominal

In 0°07'(In 0.12°)

Maximum

In 0°20'(In 0.33°)

Measure value under unladen⁽¹⁾ conditions.

⁽¹⁾	Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.

2016 - 2017 QX50

Front Wheel Alignment Specifications

AWD

FRONT WHEEL ALIGNMENT SPECIFICATIONS

Item

Standard

Camber
Degree minute (Decimal degree)

Minimum

-0° 40' (-0.66°)

Nominal

0° 05' (0.08°)

Maximum

0° 50' (0.83°)

Left and right difference

0° 33' (0.55°) or less

Caster
Degree minute (Decimal degree)

Minimum

2° 55' (2.92°)

Nominal

3° 40' (3.67°)

Maximum

4° 25' (4.41°)

Left and right difference

0° 39'(0.65°) or less

Kingpin inclination
Degree minute (Decimal degree)

Minimum

6° 10'(6.17°)

Nominal

6° 55' (6.92°)

Maximum

7° 40' (7.66°)

Toe-in

Total toe-in
Distance

Minimum

-1.5mm

Nominal

1.0mm

Maximum

3.5mm

Total toe angle Degree
minute (Decimal Degree)

Minimum

Out 0°07'30";(Out 0.12°)

Nominal

In 0°04'48";(In 0.08°)

Maximum

In 0°17'00";(In 0.28°)

Measure value under unladen⁽¹⁾ conditions.

⁽¹⁾	Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.

2017 QX50

Front Wheel Alignment Specifications

2WD

FRONT WHEEL ALIGNMENT SPECIFICATIONS

Item

Standard

Camber
Degree minute (Decimal degree)

Minimum

-0° 10'(-0.16°)

Nominal

0° 35' (0.58°)

Maximum

1° 20'(1.33°)

Left and right difference

0° 33' (0.55°) or less

Caster
Degree minute (Decimal degree)

Minimum

3° 05' (3.09°)

Nominal

3° 50'(3.83°)

Maximum

4° 35' (4.58°)

Left and right difference

0° 39' (0.65°) or less

Kingpin inclination
Degree minute (Decimal degree)

Minimum

5° 40'(5.67°)

Nominal

6°25' (6.42°)

Maximum

7° 10'(7.16°)

Toe-in

Total toe-in
Distance

Minimum

-1.5mm

Nominal

1.0mm

Maximum

3.5mm

Total toe angle Degree minute
(Decimal Degree)

Minimum

Out 0°07'30";(Out 0.12°)

Nominal

In 0°04'48";(In 0.08°)

Maximum

In 0°17'00";(In 0.28°)

Measure value under unladen⁽¹⁾ conditions.

⁽¹⁾	Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.

2016 - 2017 QX80

Front Wheel Alignment Specifications

FRONT WHEEL ALIGNMENT SPECIFICATIONS

Item

Standard

Measurement wheel

Left side

Right side

Camber
Degree minute (Decimal degree)

Minimum

-0°45' (-0.75°)

-0°55'(-0.91:)

Nominal

0° 00' (0.00°)

-0°10'(-0.17°)

Maximum

0° 45' (0.75°)

0° 35' (0.58°)

Left and right difference

0° 33' (0.55°) or less

Caster
Degree minute (Decimal degree)

Minimum

2° 20' (2.34°)

2° 40'(2.67°)

Nominal

3° 05' (3.08°)

3° 25'(3.42°)

Maximum

3° 50' (3.83°)

4° 10'(4.16°)

Left and right difference

0° 45' (0.75°) or less

Kingpin inclination
Degree minute (Decimal degree)

Minimum

Nominal

13° 20'(13.33°)⁽¹⁾

13° 25'(13.42°)⁽¹⁾

Maximum

Toe-in

Total toe-in
Distance

Minimum

In 0.4 mm (In 0.016 in)

Nominal

In 3.1 mm (In 0.122 in)

Maximum

In 5.8 mm (In 0.228 in)

Total toe-angle
Degree minute (Decimal degree)

Minimum

In 0° 01'48"; (In 0.03°)

Nominal

In 0° 12' 54"; (In 0.22°)

Maximum

In 0° 24' (In 0.40°)

>Measure value under unladen⁽²⁾ conditions.

⁽¹⁾	The minimum value and maximum value is the same as the nominal value.

⁽²⁾	Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions