LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2017 >> QX80 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Automatic Drive Positioner (Introduction)) >> Basic Inspection >> Inspection And Adjustment >> System Setting >> Description >> Setting Change
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Setting Change

WARNING: This page is about a different car, the 2016 Infiniti QX50. However, it is still accessible from the selected car via links, so may be relevant.

: Applicable

Item Content CONSULT Set switch Factory setting
Amount of seat sliding for
entry/exit assist		 The amount of seat sliding for entry/exit assist can be selected from 3 items.
[40mm/80mm/150mm]		 x - 40mm
Entry/exit assist
(seat)		 Entry/exit assist (seat) can be selected:
ON (operated) - OFF (not operated)		 x x OFF
Entry/exit assist
(steering column)		 Entry/exit assist (steering column) can be selected:
ON (operated) - OFF (not operated)		 x ON
Seat synchronization Seat synchronization can be selected: ON (operated) - OFF (not operated) - x OFF
scientia non olet · About LEMON Manuals